Bibliographie
Bibliographie
Ouvrages généraux
[Ban12] N. P. Bansal, A. R. Boccaccini, eds. Ceramics and Composites Processing Methods, Wiley & The American Ceramic Society, 2012.
[Ban14] N. P. Bansal, J. Lamon, eds. Ceramic Matrix Composites: Materials, Modeling and Technology, Wiley & The American Ceramic Society, 2014.
[Bar15] E. Baranger, J. Lamon, eds., Testing and Modeling Ceramic & Carbon Matrix Composites, MATEC Web of Conferences vol. 29, http://www.matec-conferences.org/articles/matecconf/abs/2015/10/contents/contents.html, 2015.
[Ber11] M.-H. Berger. A la recherche de la fibre céramique idéale. HDR, Université Pierre & Marie Curie. https://tel.archives-ouvertes.fr/tel-01469319v1 (2011)
[Bla18] F. Blas, F. Ansart, P. Lours, J.-P. Bonino, S. Duluard, V. Vidal, L. Pin, G. Pujol, L. Bonin, Processing thermal barrier coatings via sol-gel route: Crack network control and durability, Surf. Coat. Technol 334, 71-77 (2018).
[Boi16] P. Boisse, ed. Advances in Composites Manufacturing and Process Design, Elsevier Woodhead Scientific, 2016.
[Cav09] J.C. Cavalier, I. Berdoyes, E. Bouillon. Composites in aerospace industry. Industrial Ceramics 29(2):119–126, 2009.
[Chu16] D. D. L. Chung, Carbon Composites – Composites with Carbon Fibers, Nanofibers, and Nanotubes, Butterworth-Heinemann, 2016.
[Dav16] David, P. Carbon/carbon materials for Generation IV nuclear reactors, in Structural Materials for Generation IV Nuclear Reactors, P. Yvon, ed., Woodhead Publishing, pp. 471-493. (2016)
[Fan14] G. Fantozzi, P. Reynaud, Mechanical Behavior of SiC Fiber-Reinforced Ceramic Matrix Composites, in Comprehensive Hard Materials, V. K. Sarin, ed., Elsevier, pp.345-366 (2014)
[Fit98] E. Fitzer, L. M. Manocha. Carbon Reinforcements and Carbon/Carbon Composites. Springer, 1998.
[Hat14] Hatta, H., Weiss, R., David, P. Carbon/Carbons and their Industrial Applications, in Ceramic Matrix Composites: Materials, Modeling and Technology, J. Lamon and N. P. Bansal eds., Wiley, pp. 85-146. (2014)
[Kre08] W. Krenkel, ed., Ceramic Matrix Composites, Wiley-VCH, Weinheim, 2008.
[Sav93] G. Savage, Carbon/Carbon composites, Chapman & Hall, London, 1993.
[Xu12] Y.-D. Xu, X.-T. Yan. Chemical Vapor Deposition – An Integrated Engineering Design Approach for Advanced Materials, Springer, 2012.
Autres
[AlR17] M. Al-Rafii. Tenue résiduelle des assemblages boulonnés composites soumis à des impacts basse vitesse et basse énergie. Thèse de l’Université de TOULOUSE, http://thesesups.ups-tlse.fr/3632 (2017).
[Aud18] P. Audigié, A. Rouaix-Vande Put, A. Malié, D. Monceau, High-temperature cyclic oxidation behavior of Pt-rich γ-γ’ coatings. Part I: oxidation kinetics of coated AM1 systems after very long-term exposure at 1100°C, Corros. Sci., https://doi.org/10.1016/j.corsci.2018.08.050 (2018).
[Arn18] P. Arnaud, S. Fouvry, A dynamical FEA fretting wear modeling taking into account the evolution of debris layer, Wear 412–413, 92-108 (2018).
[Bal15] M. Balat-Pichelin, L. Charpentier, F. Panerai, O. Chazot, B. Helber, K. Nickel. Passive/active oxidation transition for CMC structural materials designed for the IXV vehicle re-entry phase, J. Eur. Ceram. Soc. 35(2), 487-502 (2015).
[Bac17] E. Baché, C. Dupleix-Couderc, E. Arquis, I. Berdoyes. Impregnation of composite materials: a numerical study, Applied Composite Materials, https://doi.org/10.1007/s10443-017-9666-9 (2017)
[Bag17] L. Baggetto, V. Sarou-Kanian, P. Florian, A. Gleizes, D. Massiot, C. Vahlas. Atomic scale structure of amorphous aluminum oxyhydroxide, oxide and oxycarbide films probed by very high field 27Al nuclear magnetic resonance. Phys. Chem. Chem. Phys. 19(11), 8101-8110 (2017)
[Beg13] G. Bégué, G. Fabre, V. Guipont, M. Jeandin, P. Bilhe, J.Y. Guédou, F. Lepoutre, Laser Shock Adhesion Test (LASAT) of EB-PVD TBCs: Towards an industrial application, Surf. Coat. Technol. 237, 305-312 (2013).
[Ben14] L. Benazzouk, E. Arquis, N. Bertrand, C. Descamps. Numerical Calculations of Dynamic Behavior of a Rotating Ceramic Composite with a Self-Healing Fluid, Ceram. Eng. Sci. Procs. 34(10), 173-184 (2014)
[Ben17] C. Ben Ramdane, R. Valle,Y. Renollet, M. Parlier, E. Martin, P. Diss.. Microstructure and mechanical behaviour of a Nextel™ 610/alumina weak matrix composite subjected to tensile and compressive loadings. J. Eur. Ceram. Soc. 37, 2919–2932 (2017).
[BeC17] X. Bertran, G. Chollon, J. Dentzer, R. Gadiou, S. Fouquet, M.-A. Dourges, F. Rebillat. Oxidation behavior at moderate temperature under dry and wet air of phenolic resin-derived carbon. Thermochimica Acta 649, 13–21 (2017).
[Ber17] R. Bertrand, O. Caty, V. Mazars, S. Denneulin, P. Weisbecker, J. Pailhes, G. Camus, and F. Rebillat, In-situ tensile tests under SEM and X-ray computed micro-tomography aimed at studying a self-healing matrix composite submitted to different thermomechanical cycles, J. Eur. Ceram. Soc. 37(10), 3471–3474 (2017).
[Bla17] M. Blais, N. Moulin, P.J. Liotier, S. Drapier. Resin infusion-based processes simulation : coupled Stokes-Darcy flows in orthotropic preforms undergoing finite strain. Int. J. Mater. Form. 10, 43-54 (2017)
[Bro15] E. Brodu, M. Balat-Pichelin, D. De Sousa Meneses, J.-L. Sans. Reducing the temperature of a C/C composite heat shield for solar probe missions with an optically selective semi-transparent pyrolytic boron nitride (pBN) coating, Carbon 82, 39-50 (2015).
[Bro17] M. Broutelle, F. Lachaud, C. Dupleix-Couderc and A. Daidié. Comportement en matage d’un CMC oxyde/oxyde. Actes des 20es Journées Nationales des Composites (JNC20) (2017)
[Boi13a] G. Boisselier, F. Maury, F. Schuster. SiC coatings grown by liquid injection chemical vapor deposition using single source metalorganic precursors. Surf. Coat. Technol. 215 152–160 (2013).
[Boi13b] G. Boisselier, Dépôt chimique en phase vapeur de carbures de chrome, de silicium et de hafnium assisté par injection liquide pulsé, Doctorat de l’Institut National Polytechnique, Toulouse, https://www.theses.fr/2013INPT0064 (2013).
[Bon16] S. Bonnamy, A. Oberlin, Transmission Electron Microscopy of carbon materials, in Materials Science and Engineering of Carbon, M. Inagaki, F.-Y. Kang, eds., Butterworth-Heinemann, pp. 45-70 (2016).
[Bou14] F. Bouillon, A. Candeau, F. Dupé, G. Mecuson, P. Metge, R. Etchart-Salas, Développement et certification d’un échappement de turboréacteur en CMC pour l’aviation civile. Matériaux 2014, Montpellier. 27 novembre 2014.
[Bri12] M. Brisebourg, Corrosion active/passive de matériaux en présence de mélanges réactifs à très haute température, thèse, Université de Bordeaux, http://www.theses.fr/16984885X (2012).
[Bue14] E. Buet, C. Sauder, D. Sornin, S. Poissonnet, J.-N. Rouzaud, C. Vix-Guterl. Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA3 fibres. J. Eur. Ceram. Soc. 34(2), 179-188 (2014).
[Cat13] O. Caty, G. Couégnat, M. Charron, T. Agulhon, G. L. Vignoles, Thermomechanical simulation of C/C composites from X-ray CMT images, 37th Intl. Conf. on Adv. Ceram. & Compos. (ICACC 2013), Daytona Beach, FL, 2013.
[Cat15] S. Catché, R. Piquet, F. Lachaud, B. Castanié, A. Benaben. Analysis of hole wall defects of drilled
CFRP laminates. J. Compos. Mater. 49(10)1223-1240 (2015).
[Cha11] C. Chateau, L. Gélébart, M. Bornert, J. Crépin, E. Boller, C. Sauder, W. Ludwig, In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites, Compos. Sci. Technol. 71(6), 916–924 (2011).
[Che17a] Y. Chen, Damage mechanisms in SiC/SiC composite tubes : three-dimensional analysis coupling tomography imaging and numerical simulation. Thèse, ENPC, https://www.theses.fr/224725785 (2017).
[Che17b] Y. Chen, L. Gélébart, C. Chateau, M. Bornert, A. King, P. Aimedieu, and C. Sauder. Caractérisation expérimentale des mécanismes d’endommagement des tubes CVI-SiC/SiC par tomographie X, JNC20 : Journées Nationales sur les Composites, https://hal.archives-ouvertes.fr/hal-01598516/document (2017)
[Cor15] J. Cormier, F. Mauget, J.-B. le Graverend, C. Moriconi, and J. Mendez, Issues Related to the Constitutive Modeling of Ni-based Single Crystal Superalloys under Aeroengine Certification Conditions. Aerosp. Lab J. 9, 1-13 (2015).
[Cou12] G. Couégnat, W. Ros, T. Haurat, C. Germain, E. Martin, G.L. Vignoles, An Integrated Virtual Material Approach for Ceramic Matrix Composites, Ceram. Eng. Sci. Procs. 33(10), 83-91 (2012).
[DaC15] J.-P. Da Costa, P. Weisbecker, B. Farbos, J.-M. Leyssale, G.L. Vignoles, C. Germain. Investigating carbon materials nanostructure using image orientation statistics. Carbon 84, 160-173 (2015).
[De16] I. De, J.-L. Battaglia,G. L. Vignoles. Thermal properties measurements of a silica/pyrocarbon composite at the microscale. J. Appl. Phys. 120(24), 245101 (2016).
[DEl17] R. D’Elia, G. Dusserre, S. Del Confetto, N. Eberling-Fux, C. Descamps, T. Cutard. Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling. Eur. Polymer J. 76, 40-52. (2016)
[Dri13] P. Drieux, G. Chollon, S. Jacques, A. Allemand, D. Cavagnat, T. Buffeteau.. Experimental study of the chemical vapor deposition from CH3SiHCl2/H2 : Application to the synthesis of monolithic SiC tubes. Surf. Coat. Technol. 230, 137–144 (2013).
[Dug15] K. Dugois, S. Vincent, D. Lasseux, E. Arquis, C. Descamps, A macroscopic model for the impregnation process of composite material by a concentrated suspension, Procs. Euromat 2015, Sep 2015, Warsaw, Poland. https://hal-upec-upem.archives-ouvertes.fr/hal-01172315 (2015)
[Dus16] G. Dusserre, O. Valentin, F. Nazaret, T. Cutard, Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200°C, J. Eur. Ceram. Soc. 36(10), 2627-2639 (2016)
[Duq16] L. Duquesne, C. Lorrette, C. Pradère, G. L. Vignoles, J.-C. Batsale, A flash characterisation method for thin cylindrical multilayered composites based on the combined front and rear faces thermograms, Quant. Infrared Thermogr. J. 13(2), 1–13 (2016).
[ElY15] J. El Yagoubi, J. Lamon, J.-C. Batsale, J. Dhote, M. Le Flem. Multiscale Thermal Characterization of Mechanically Loaded Ceramic Matrix Composite : Estimation of Thermal Diffusivity at Micro/Mesoscale. Exper. Mech. 55(4), 783–794 (2015).
[Far14] B. Farbos, P. Weisbecker, H.E. Fischer, J.-P. Da Costa, M. Lalanne, G. Chollon, C. Germain, G.L. Vignoles, J.-M. Leyssale. Nanoscale structure and texture of highly anisotropic pyrocarbons revisited with transmission electron microscopy, image processing, neutron diffraction and atomistic modeling. Carbon 80(1), 472–489 (2014).
[Fel17] C. Fellah, Influence de la nature des interfaces carbonées au sein des composites SiC/SiC à renfort Hi-Nicalon S et Tyranno SA3 sur leur comportement mécanique. Thèse, Mines Paris/PSL, http://www.mines-paristech.fr/Formation/Doctorat/Annuaire-docteurs/Detail/Clementine-FELLAH-2017/64393 (2017).
[Fer13] R. Ferre, S. Fouvry, B. Berthel, R. Amargier, J. A. Ruiz-Sabariego, Prediction of the Fretting Fatigue crack nucleation endurance of a Ti-6V-4Al/ Ti-6V-4Al interface: Influence of plasticity and tensile/shear fatigue properties, Procedia Eng. 66, 803 – 812 (2013).
[Fot18] E.S. Fotso Gueutue, A. Canizares, P. Simon, N. Raimboux, L. Hennet, M.R. Ammar. Nanosecond time-resolved Raman spectroscopy for solving some Raman problems such as luminescence or thermal emission, J. Raman Spectrosc. 49, 822-829 (2018)
[Fou14] S. Fouvry, H. Gallien, B. Berthel, From uni- to multi-axial fretting-fatigue crack prediction: development of a stress-gradient-dependent critical distance approach, Int. J. Fatigue 62, 194–209 (2014).
[Gag18] A. Gagnoud, Y. Du Terrail Couvat, O. Budenkova. “3D Numerical Modeling for Inductive Processes”, EPM2018, Octobre 2018.
[Gak18] G.P. Gakis, H. Vergnes, E. Scheid, C. Vahlas, B. Caussat, A.G. Boudouvis. Computational Fluid Dynamics simulation of the ALD of alumina from TMA and H2O in a commercial reactor. Chem. Eng. Res. Des. 132 795–811 (2018).
[Gen12] M. Genet, L. Marcin, E. Baranger, C. Cluzel, P. Ladevèze, A. Mouret, Computational prediction of the lifetime of self-healing CMC structures, Compos. Part A: Appl. Sci. Manuf. 43(2), 294-303 (2012).
[God16] N. Godin, P. Reynaud, M. R’Mili, G. Fantozzi. Identification of a critical time with acoustic emission monitoring during static fatigue tests on ceramic matrix composites: towards lifetime prediction, Appl. Sci. 6, 43 (2016) doi:10.3390/app6020043.
[Gri13] E. Grippon, Endommagement et microfissuration d’un composite à matrice céramique tissé 3D : approche multi-échelle et évaluation ultrasonore. Thèse, Université Bordeaux I. http://www.theses.fr/2013BOR14908 (2013).
[Ham15] H. Hammoud, S. Vaucher, F. Valdivieso, Dielectric and thermal properties of cerium dioxide up to 1000°C and the effect of the porosity for microwave processing studies, Thermochim. Acta 617, 83-89 (2015).
[Hen17] L. Henry, J. Roger, Y. Le Petitcorps, C. Aymonier, L. Maillé. Preparation of ceramic materials using Supercritical Fluid Chemical Deposition. J. Supercrit. Fluids, https://doi.org/10.1016/j.supflu.2017.11.012 (2017)
[Hod13] A. Hodroj, P. Simon, P. Florian, M.H. Chopinet, Y. Vaills. Phase separation and spatial morphology in sodium silicate glasses analyzed by AFM, light scattering and NMR, J. Am. Ceram. Soc. 96, 2454-2460 (2013).
[Hol00] M. Holmquist, J. Adlerborn, T. Razzell, O. Sudre, L. Molliex. Processing and properties of oxide matrix/oxide fibre composite, Brit. Ceram. Trans. 99(6), 266-269 (2000)
[Hou17] D. Hourlier, S. Venkatachalam, M.R. Ammar, Y. Blum. Pyrolytic conversion of organopolysiloxanes, J. Anal. Appl. Pyrolysis 123, 296–306 (2017)
[Jac13] S. Jacques, I. Jouanny, O. Ledain, L. Maillé, P. Weisbecker. Nanoscale multilayered and porous carbide interphases prepared by pressure-pulsed reactive chemical vapor deposition for ceramic matrix composites. Appl. Surf. Sci. 275, 102–109 (2013).
[Jac14] E. Jacques, Y. Le Petitcorps, L. Maillé, C. Lorrette, L. Chaffron. Joining silicon carbide plates by titanium disilicide-based compound. Powder Metall. & Ceram., 52(9-10) 606-611 (2014)
[Kle15] C. Klein. “Etude du procédé de densification par caléfaction de composites C/C, modélisation, optimisation du contrôle et du bilan énergétique”, Thèse, Université de Bordeaux, 15 Décembre 2015, http://www.theses.fr/2015BORD0231
[Lac01] F. Lachaud, R. Piquet, F. Collombet and L. Surcin. Drilling of composites structures. Compos. Struct. 52(3-4)551-566 (2001).
[Lac14] F. Lachaud, R. Piquet, G. Aldebert, J. Huet, L. Michel. Analyse du comportement mécanique des assemblages boulonnés composites à renforts tissés, Rev. Compos. & Mater. Avancés 24(4), 449-464 (2014).
[Lac15] F. Lachaud, C. Espinosa, L. Michel, P. Rahmé, R. Piquet. Modelling strategies for predicting the residual strength of impacted composite aircraft fuselages. Appl. Compos. Mater. 22(6), 599-621 (2015).
[Lac17] J. Lachaud, Y. Aspa, G. L. Vignoles. Analytical modeling of the transient ablation of a 3D C/C composite. Int. J. Heat Mass Transf. 115A, 1150-1165 (2017)
[Lad14] P. Ladevèze, E. Baranger, M. Genet, and C. Cluzel. Damage and Lifetime Modeling for Structure Computations, in Ceramic matrix composites: materials, modeling and technology, N. P. Bansal & J. Lamon, eds., John Wiley & Sons, Inc., pp. 465—519 (2014).
[Lam99] F. Lamouroux, S. Bertrand, R. Pailler, R. Naslain, and M. Cataldi. Oxidation-resistant carbon-fiber-reinforced ceramic-matrix composites. Compos. Sci. Technol. 59(7), 1073-1085 (1999).
[LeP15] Y. Le Petitcorps, L. Maillé, E. Jacques, C. Lorrette, T. Piquero. Matériau de brasage pour l’assemblage de plaques en SiCf/SiCm. Chocs Focus, 4, 22–23 (2015).
[Led16] O. Ledain, S. Jacques, L. Maillé. Consolidation and conversion of carbon powders into TiC by Reactive Chemical Vapour Infiltration. J. Eur. Ceram. Soc. 36(3), 481–488 (2016).
[Leg18] D. Leguillon, E. Martin,. Prediction of multi-cracking in sub-micron films using the coupled criterion. Int. J. Fract. 209, 187–202 (2018).
[Lie17] C. Liégaut, P. Bertrand, L. Maillé, F. Rebillat. UHTC based matrix as a protection for C/C composites for very high temperature use: original manufacturing and oxidation resistance, 15th Conference & Exhibition of the European Ceramic Society, Budapest, Hongrie, http://static.akcongress.com/downloads/ecers/ecers2017-abstract-book.pdf, p. 190 (2017)
[Lie18] C. Liégaut, Élaboration de composites à matrice céramique ultra-réfractaire résistants aux très hautes températures sous flux gazeux, thèse, Université de Bordeaux, http://www.theses.fr/2018BORD0035 (2018)
[Liu04] X. Liu, S. Ramanathan, E. Lee, T. E. Seidel. Atomic Layer Deposition of Aluminum Nitride Thin films from Trimethyl Aluminum (TMA) and Ammonia. Mat. Res. Soc. Symp. Proc. 811 D1.9 (2004)
[Mai14] L. Maillé, S. Le Ber, M.-A. Dourges, R. Pailler, A. Guette, J. Roger.. Manufacturing of ceramic matrix composite using a hybrid process combining TiSi2 active filler infiltration and preceramic impregnation and pyrolysis. J. Eur. Ceram. Soc. 34, 189-195 (2014)
[Mai17] L. Maillé, Y. Le Petitcorps, J. Roger. Low temperature matrix synthesis by activated nitridation of a TiSi2 powder. J. Eur. Ceram. Soc. 37(13), 3885-3889 (2017).
[Mal14] P. Mallet-Ladeira, P. Puech, P. Weisbecker, G.L. Vignoles, M. Monthioux. Behavior of Raman D band for pyrocarbons with crystallite size in the 2-5 nm range. Appl. Phys. A: Mater. Sci. Process. 114(3), 759-763 (2014).
[Mar11] C. Mary, S. Fouvry, J.M. Martin, B. Bonnet, Pressure and temperature effects on Fretting Wear damage of a Cu–Ni–In plasma coating versus Ti17 titanium alloy contact, Wear 272 (1-3), 18-37 (2011).
[Mar14] N. Martin, R. Pailler, J.-M. Leyssale.. Carbon–ceramic (AlN) interfaces from liquid quench ab initio molecular dynamics simulations. Mol. Simul. 40(1-3), 160–168 (2014).
[Mar16] A. Marchais, J. Roger, Y. Le Petitcorps. Capillary infiltration of hexadecane in packed SiC powder and in SiC/SiC preforms: Pore description and calculation of molten Si infiltration. Ceram. Int. 42, 7774–7780. (2016)
[Mas13] D. Massiot, R.J. Messinger, S. Cadars, M. Deschamps, V. Montouillout, N. Pellerin, E. Veron, M. Allix, P. Florian, F. Fayon, Topological, Geometric, and Chemical Order in Materials: Insights from Solid-State NMR, Accounts Chem. Res. 46 1975–1984 (2013).
[Mas17] O. A. Maslova, G. Guimbretière, M.R. Ammar, L. Desgranges, C. Jégou, A. Canizarès, P. Simon. Raman imaging and Principal Component Analysis-Based Data Processing on Uranium Oxide Ceramics, Mater. Charact. 129, 260-269 (2017)
[Mau12] F. Mauget, D. Marchand, M. Morisset, D. Bertheau, J. Cormier, and J. Mendez, Nouveau moyen de caractérisation des matériaux : Conditions extrêmes et sollicitations thermomécaniques proches des conditions d’usages. Matériaux & Techniques 6/7, 541-545 (2012).
[Mau14] F. Mauget, D. Marchand, G. Benoit, M. Morisset, D. Bertheau, J. Cormier, J. Mendez, Z. Hervier, E. Ostoja-Kuczynski, and C. Moriconi. Development and use of a new burner rig facility to mimic service loading conditions of Ni-based single crystal superalloys. In Procs. Eurosuperalloys 2014. Matec Web of Conferences 14, 20001 (2014).
[Mau17] F. Mauget, F. Hamon, M. Morisset, J. Cormier, F. Riallant, and J. Mendez, Damage mechanisms in an EB-PVD Thermal Barrier Coating System during TMF and TGMF testing conditions under combustion environment. Int. J. Fatigue 99, 225-234 (2017).
[Maz17] V. Mazars, O. Caty, G. Couégnat, A. Bouterf, S. Roux, S. Denneulin, S., J. Pailhès, G. L. Vignoles. Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests. Acta Mater. 140, 130–139 (2017).
[Mic18] A. Michau, F. Maury, F. Schuster, I. Nuta, Y. Gazal, R. Boichot, M. Pons. Chromium Carbide Growth by Direct Liquid Injection Chemical Vapor Deposition in Long and Narrow Tubes, Experiments, Modeling and Simulation, Coatings 8, 220 (2018)
[Mom12] S. Momon, N. Godin., P. Reynaud., M. R’Mili, G. Fantozzi., Unsupervised and supervised classification of AE data collected during fatigue test on CMC at high temperature, Compos. Part A 43, 254–260 (2012).
[Noz18] F. Nozahic, C. Estournès, A. L. Carabat, W. G. Sloof, S. van der Zwaag, D. Monceau, Self-healing thermal barrier coating systems fabricated by spark plasma sintering. Mater. Des. 143, 204-213 (2018).
[Oul18] L. Oulanti, N. Cohaut, F. Warmont, S. Bonnamy. Fibres de carbone ex-cellulose. Caractérisations structurales et microtexturales. Journées Nationales de la SFEC, Obernai, Mai 2018.
[Pal13] C. Pallier, J.-M. Leyssale, L.A. Truflandier, A.-T. Bui, P. Weisbecker, C. Gervais, H. E. Fischer, F. Sirotti, F. Teyssandier, G. Chollon, Structure of an amorphous boron carbide film: An experimental and computational approach, Chem. Mater. 25 (13), 2618-2629 (2013).
[Par03] M. Parlier, M.H. Ritti. State of the art and perspectives for oxide/oxide composites. Aerosp. Sci. Tech. 7(3), 211-221 (2003)
[Par17] E. Paroissien, F. Lachaud, S. Schwartz, A. Da Veiga and P. Barrière. Simplified stress analysis of hybrid (bolted/bonded) joints. Int. J. Adhesion & Adhesives 77, 183-197 (2017)
[Par18] E. Paroissien, L.F.M. Da Silva, F. Lachaud. Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads Compos. Struct. 203, 85-100 (2018).
[Pir18] C. Piriou, L. Viers, R. Lucas, F. Bouzat, H. Laadoua, Y. Champavier, S. Foucaud, C. Coelho, F. Babonneau. Rheological and thermal behaviours of a hyperbranched polycarbosilane. Appl. Organometal. Chem. e4443. https://doi.org/10.1002/aoc.4443 (2018)
[Puy17] G. Puyoo, F. Teyssandier, R. Pailler, C. Labrugère, G. Chollon. Boron carbonitride coatings synthesized by LPCVD, structure and properties. Carbon 122, 19–46 (2017).
[Rac15] E. Racle. Comportement d’un composite à matrice céramique en fatigue et mise en place d’indicateurs d’endommagement par émission acoustique. Thèse, INSA de Lyon. http://www.theses.fr/19417414X (2014)
[Rah08] P. Rahmé, Y. Landon, P. Lagarrigue, F. Lachaud and R. Piquet. Study into causes of damage to carbon epoxy composite material during the drilling process. Int. J. Machining & Machinability of Mater. 3(3-4)309-325. (2008)
[Rah15] P. Rahmé, Y. Landon, F. Lachaud, R. Piquet, P. Lagarrigue. Delamination-free drilling of thick composite materials. Compos. Part A: Appl. Sci. Manuf. 72, 148-159 (2015).
[Rie13] J.-C. Rietsch, P. Brender, J. Dentzer, R. Gadiou, L. Vidal, C. Vix-Guterl. Evidence of water chemisorption during graphite friction under moist conditions. Carbon 55, 90–97 (2013).
[Rog15] J. Roger, A. Marchais, & Y. Le Petitcorps. Examination of the interaction between liquid silicon and bulk silicon carbide. J. Cryst. Growth 426, 1–8 (2015).
[Rog17] J. Roger, L. Nouvian, Y. Le Petitcorps, L. Maillé. Nitridation enhancement of TiSi2 powders by addition of nickel. J. Alloys Compounds, 724, 249–257 (2017).
[Rog18] J. Roger, L. Guesnet, A. Marchais, Y. Le Petitcorps. SiC/Si composites elaboration by capillary infiltration of molten silicon. J. Alloys Compounds 747, 484–494 (2018).
[Sch17] M. Schmidt, C. Durif, E. Diaz Acosta, C. Salameh, H. Plaisantin, P. Miele, R. Backov, R. Machado, C. Gervais, J.-G. Alauzun, G. Chollon, S. Bernard. Molecular Level Processing of Si-(B)-C Materials with Tailored Nano-/Microstructures. Chem. Eur. J., 23(67), 17103–17117 (2017).
[Ser13a] A. Serre, J. Blein, Y. Pierre, P. David, F. Audubert, S. Bonnamy, E. Bruneton. Study of the silicon carbide matrix elaboration by film boiling process, Ceram. Eng. Sci. Procs. 33(9), 71-84 (2013).
[Ser13b] A. Serre. Développement du procédé de densification rapide appliqué au carbure de silicium. Thèse de l’Université d’Orléans, http://www.theses.fr/2013ORLE2004 (2013).
[Sim17] C. Simon, F. Rebillat, G. Camus. Electrical resistivity monitoring of a SiC/[Si-B-C] composite under oxidizing environments. Acta Mater. 132, 586–597 (2017).
[Sol16] C. Sola, B. Castanié ; L. Michel, F. Lachaud, A. Delabie, A. Mermoza. On the role of kinking in the bearing failure of composite laminates, Compos. Struct. 141, 184-193 (2016).
[Sol17] C. Sola, B. Castanié, L. Michel, F. Lachaud, A. Delabie, A. Mermoza. Bearing fatigue of composite laminates : damage monitoring and life prediction, Compos. Part B 110, 487-496 (2017).
[Tai16] B. Taillet, R. Pailler, F. Teyssandier, E. Philippe, E. Bouillon. Method for producing a part consisting of composite material by synthesis by means of a self-sustained reaction at a high temperature. Pat. App. WO2016009148 (A1) (2016).
[Van15] T. Vandellos, F. Bouillon, A. Candeau, B. Legin, E. Voland, F. Laurin, Z. Aboura. Sizing of bolted junctions for 3D woven ceramic matrix composites structures using ONERA damage model and comparisons with multi-instrumented tests. 20th International Conference on Composites Materials, Copenhagen (ICCM20), http://www.iccm-central.org/Proceedings/ICCM20proceedings/papers/paper-1218-4.pdf , 19-24 Juillet 2015.
[Ver14] C. Verdon, O. Szwedek, A. Allemand, S. Jacques, Y. Le Petitcorps, P. David. High temperature oxidation of two- and three-dimensional hafnium carbide and silicon carbide coatings. J. Eur. Ceram. Soc. 34(4), 879–887 (2014).
[Via16] A. Viat, M.I. De Barros Bouchet, B. Vacher, T. Le Mogne, S.Fouvry, J.F. Henne, Nanocrystalline glaze layer in ceramic-metallic interface under fretting wear, Surf. Coat. Technol. 308, 307–315 (2016).
[Via17a] A. Viard, L. Gottardo, D. Lopez-Ferber, A. Soleilhavoup, C. Salameh, S. Samal, Y. Gueguen, T. Rouxel, G. Motz, F. Babonneau, C. Gervais, S. Bernard. Molecular Design of Melt-Spinnable Co-Polymers as Si-B-C-N Fiber Precursors, Dalton Trans. 46, 13510-13523 (2017).
[Via17b] A. Viard, D. Fonblanc, M. Schmidt, A. Lale, C. Salameh, A. Soleilhavoup, M. Wynn, P. Champagne, S. Cerneaux, F. Babonneau, G. Chollon, F. Rossignol, C. Gervais, S. Bernard. Molecular Chemistry and Engineering of Boron-Modified Polyorganosilazanes as New Processable and Functional SiBCN Precursors, Chem. Eur. J. 23, 9076-9090 (2017).
[Via17c] A. Viat, G. Guillonneau, S. Fouvry, G. Kermouche, S. São João, J. Wehrs , J. Michler , J. F. Henne, Brittle to ductile transition of tribomaterial in relation to wear response at high temperatures, Wear 392–393, 60–68 (2017).
[Vig15] G. L. Vignoles, P. Weisbecker, J.-M. Leyssale, S. Jouannigot, G. Chollon, « Carbones pyrolytiques ou pyrocarbones – des matériaux multi-échelles et multi-performances », Techniques de l’Ingénieur, ref. NM3150. Date de mise en ligne: Avril 2015.
[Vig16] G. L. Vignoles, “Chemical Vapor Deposition/Infiltration Processes For Ceramic Composites”, Chapter 8 of “Advances in Composites Manufacturing and Process Design “, P. Boisse Ed., Elsevier Woodhead Scientific. ISBN-13: 978-1-78242-307-2, pp 147-176. (2016).
[Vil17] A. Viladegut, F. Panerai, O. Chazot, T. Pichon, P. Bertrand, C. Verdy, C. Coddet, Design, integration and preliminary results of the IXV Catalysis experiment, CEAS Space J. 9(2),141-151 (2017).
[Wei12] P. Weisbecker, J.-M. Leyssale, H.E. Fischer, V. Honkimäki, M. Lalanne, M., G.L. Vignoles. Microstructure of pyrocarbons from pair distribution function analysis using neutron diffraction. Carbon 50(4), 1562-1573 (2012).
[Yon17] M. Yon, V. Sarou-Kanian, U. Scheler, J.M. Bouler, B. Bujoli, D. Massiot, F. Fayon. Solid-state 31P and 1H chemical MR micro-imaging of hard tissues and biomaterials with magic angle spinning at very high magnetic field, Sci. Rep. 7, 8224 (2017)
[Zha17] B. Zhang, M. Deschamps, M.R. Ammar, E. Raymundo-Piñero, L. Hennet, D. Batuk, J.-M. Tarascon. Laser synthesis of hard carbon for anodes in Na-ion battery. Adv. Mater. Technol. 2(3), 1600227 (2017)